Increasing internal memory in Android Since manufacturers began placing limitations on their products, people have always discovered a way around them. It is not always recommended to do that because when manufacturers place limits, it means that they can be held responsible up till that point, nevertheless we don’t always want to settle for just the limits. In the case of smartphones, their performance, capacity and the possibility of installing new applications that give much more advanced functions than the conventional ones can be extended.

Exceeding the limits that a manufacturer places on a product almost always causes loss of warranty and support of the company responsible, since you’ve crossed the lines they placed, they will not be held responsible for a fault that arises from increasing the memory or from overclocking in some cases. Overclocking is the best known method of surpassing limitations in computing, it is used to describe the process of increasing the capacity and speed of a computer’s components, both the CPU and the GPU are modified to surpass the limitations with which the device has been designed, even many people apply this until they witness the real limits of these devices or in most cases until the devices stop working.

Increasing internal Memory in Android

In Android there is a method highly recommended but not valid for all smartphones with Android operating system; That is to increase the internal memory of the device by partitioning an SD card. A partitioning of the SD card will be sufficient to increase the internal memory of our smartphone and enable us to install new applications, transfer applications from the systems’ memory to the new internal memory, among other features … a very good option if we do not have enough memory resource on our device.

For this method it is necessary to have superuser permissions, this is the first step in exceeding the limits on your smartphone. This method was very practical for low-end smartphones that were produced in the early days of Android devices such as the Samsung Galaxy ACE which was very good initially at its launch but did not have enough capacity to download many applications due to low internal storage. Using this method as a superuser has made it easier for people who still have these kind of smartphones to download and enjoy more applications.

Partitioning the SD Memory Card

The first step is to partition the SD memory and it is highly recommended not to remove the SD card from your device too often, if you are one of the people that always like to change the SD memory card, this method is not recommended for you. Here at Vofeel we will teach you the most practical way to prepare the SD memory card for the device and increase its internal memory.

  1. With our smartphone being turned off, the first thing is to enter into Recovery mode, then enter into CWM (ClockWork Mode) this is different for each device.
  2. Enter the advanced section and then the Partition SD Card option to select an amount.
  3. Depending on the capacity of our SD memory and how much we want to partition we select a size (Recommended 1204M)
  4. Once you enter a size it is best to choose 0M for the Swap Size and wait for the partition of the SD memory to finish. Then restart our device.

Note: It is not recommended to change the Swap Size unless you have an idea of what it is meant for and you want to experience new features.

Attaching the partition to the device

It is not sufficient to partition the internal memory, some additional steps need to be followed so that the partition can be recognized. It is necessary to download an application called Link2SD from the Google Playstore to attach the partition and increase the memory of our device.

1. Download Link2SD from the Play Store or install the apk.
2. Enter the application first and select Ext2 as the SD memory partition.
3. Reboot the device so that the partition is recognized by the application and the device.

Transferring Applications to the partition

After following this process and the partition has been recognized by the application. Now you can transfer applications installed in your internal memory to thie new partition or SD memory card ising the Link2SD app.

1. Press and hold down the application you want to transfer until you see more options.
2. Touch the Create link and accept the option to transfer the application to the partition.
3. In Link2SD settings activate the Automatic Link option so that each time an application is installed it goes to this created partition (Recommended).

Enter a comment

The email will not be displayed ;)